Cisco Linksys E1200 User Manual Download Page 72

Page: 72 / 92

Port Forwarding and Port Triggering

Linksys E-Series

How to configure your Xbox for online

gaming

For

ALL

Why would I set up my Xbox for online gaming?

Online gaming adds another

dimension to using your Xbox . As with other online gaming applications and

gaming consoles, you need to forward multiple ports to use your Xbox for

online gaming . The procedure for setting up your Xbox is almost identical to

setting up multiple port forwarding for VNC remote control . (See “How to set

up port forwarding for multiple ports” on page 58) .

noTE

For more information on configuring your router for online gaming,

see “How to optimize your router for gaming and voice” on page 32 .

Refer to your game console documentation to determine the ports used by

your device . The Xbox uses four ports:

•

TCP port 80

•

UDP port 88

•

TCP/UDP port 53

•

TCP/UDP port 3074

To set up an Xbox using multiple entries of single port forwarding:

Applications & Gaming > Single Port Forwarding

Connect your Xbox 360 to your router .

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25) .

Set up a DHCP reservation for the IP address of the Xbox . (See “How to set

up the DHCP server on your router” on page 29) .
– OR –
Refer to your game console’s documentation to set a static IP address for

your device .

Click the

Applications & Gaming

tab, then click the

Single Port

Forwarding

page . The Xbox uses four ports, so create four port

forwarding entries on this page .

Enter the port and protocol information as shown in the image below .

In the

To IP Address

field, enter a 1- to 3-digit number that corresponds

to the last three digits of the IP Address of the Xbox 360 . The rest of the IP

address is already completed .

Select

Enabled

next to the

To IP Address

field for each entry .

Click

Save Settings

at the bottom of the page .

Summary of Contents for Linksys E1200





























































































Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands

Cisco Linksys E1200, User Manual

Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands