Cisco Linksys E1200 User Manual Download Page 56

Page: 56 / 92

Improving Security

Linksys E-Series

How to connect a device using its Wi-Fi Protected

Setup PIN

Use this method if your device has a Wi-Fi Protected Setup

PIN

(Personal

Identification Number) .

To connect a device using the device’s Wi-Fi Protected Setup PIn:

Wireless > Basic Wireless Settings

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25) .

Click the

Wireless

tab, then, if your router is not an E4200, click the

Basic

Wireless Settings

page .

Click

Wi-Fi Protected Setup

Enter the PIN from the device into the

PIn

field on the router’s

Wi-Fi

Protected Setup

screen, then click

Register

After the device has been connected, click

How to connect a device using the router’s Wi-Fi

Protected Setup PIN

Use this method if your client device asks for the router’s PIN .

To connect a device using the device’s Wi-Fi Protected Setup PIn:

Wireless > Basic Wireless Settings

Log into the browser-based utility (see “How to open the browser-based

utility” on page 25) .

Click the

Wireless

tab, then, if your router is not an E4200, click the

Basic

Wireless Settings

page .

Click

Wi-Fi Protected Setup

On the client device, enter the PIN listed on the router’s

Wi-Fi Protected

Setup

screen . It is also listed on the bottom of the router . In the example

below, the router’s PIN is 32744781 .

Follow the device’s instructions to complete setup .

How to connect a device manually

If you have devices that do not support Wi-Fi Protected Setup, note the wireless

settings in the

Basic Wireless Settings

screen, then manually configure those

devices .
For each wireless network, the Network Name (SSID), Security, and Passphrase

are displayed at the bottom of the screen .

Summary of Contents for Linksys E1200





























































































Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands

Cisco Linksys E1200, User Manual

Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands