26
Figure 27
Connecting the External Power Supply to the Cisco IAD2435 IAD
The following message appears at the end of the bootup messages:
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]:
Step 3
Enter
no
to proceed with manual configuration using the command-line interface (CLI):
Would you like to enter the initial configuration dialog? [yes/no]:
no
Would you like to terminate autoinstall? [yes]
Step 4
Press
Return
to terminate autoinstall and continue with manual configuration.
Several messages appear, ending with lines similar to the following:
Copyright (c) 2008 by cisco Systems, Inc.
Compiled <
date
> <
time
> by <
person
>
Step 5
Press
Return
to bring up the
Router>
prompt:
flashfs[4]: Initialization complete.
Router>
Step 6
Enter privileged EXEC mode:
Router>
enable
Router#
Step 7
Continue with the ““Performing the Initial Configuration” section on page 28.”
LEDs
Figure 28 and Figure 29 show the LED functions of the different Cisco IAD243x chassis.
1
Power lock clip
2
Power cord
3
Power adapter
4
AC plug
IAD2435-8FXS
12V DC SA
CONSOLE
AUX
1
LAN
0
WAN/T1
FXS
272268
1
2
4
3
