15
Figure 13
Attaching the Cisco IAD2430, Cisco IAD2431, or Cisco IAD2432 IAD Chassis to a Wall
Wall-Mounting the Cisco IAD2435 IADs
You can mount the Cisco IAD2435 router on a wall or other vertical surface by using the molded mounting brackets on the
bottom of the router and two number-six, 3/4-inch (M3.5 x 20 mm) screws. You must provide the screws. Figure 14 shows the
mounting-screw slots.
Caution
If you are mounting the router on drywall, use two hollow-wall anchors (1/8 inch with 5/16-inch drill bit, or M3
with 8-mm drill bit) to secure the screws. If the screws are not properly anchored, the strain of the network cable
connections could pull the router from the wall.
1
Wall
2
Bracket
3
Wall stud
4
Keyhole (for starter screw)
103514
CISCO IAD2400
SERIES
3
1
2
4