11
Using Rack-Mount Brackets
A new bracket accompanies this product. See Figure 6. This rack-mount bracket, with a keyhole feature, facilitates
wall-mounting by allowing the installer to rest the bracket on a starter screw, freeing the installer’s hands.
•
To rack-mount the unit, you have three positioning options. See the “Rack-Mounting the Chassis” section on page 12.
•
To wall-mount the unit, attach the short leg of the bracket to the chassis at the pair of holes in the center of the chassis side.
See the “Wall-Mounting the Chassis” section on page 13.
Figure 6
Rack-Mount Bracket
Figure 7 shows the rack-mount bracket for the Cisco IAD2435-8FXS model.
Figure 7
Rack-Mount Bracket (Cisco IAD2435-8FXS only)
Table 1
Bracket Attachment Screws for Rack-Mounting and Wall-Mounting
Rack-Mounting Wall-Mounting
Eight Phillips head screws (four per bracket).
Four 6-32 slotted hex screws (two per bracket) and four plastic washers.
Washers are not required.
Washers are required.
88815
280933
