Configuring Network
Configuring LAN Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide
47
3
Configuring Static DHCP
You can configure the CVR100W to assign a specific IP address to a device with a
specific MAC address.
To configure static DHCP:
STEP 1
Choose
Networking
>
LAN
>
Static DHCP
.
STEP 2
From the
VLAN
drop-down menu, choose a VLAN number.
STEP 3
Click
Add Row
.
STEP 4
Enter the following information:
STEP 5
To edit the settings of a static DHCP client, select the client and click
Edit
. To
delete a selected DHCP client, click
Delete
. Click
Save
to apply your changes.
Description
Enter a description of the client.
IP Address
Enter the IP address of the device.
The assigned IP address should be outside the pool of
the DHCP addresses configured. The DHCP pool is
treated as a generic pool and all reserved IPs should
be outside this pool.
Static DHCP assignment means that the DHCP server
assigns the same IP to the defined MAC address every
time the device is connected to the network.
The DHCP server serves the reserved IP address
when the device using the corresponding MAC
address requests an IP address.
MAC Address
Enter the MAC address of the device.
The format for the MAC address is
XX:XX:XX:XX:XX:XX where X is a number from 0 to 9
(inclusive) or an alphabetical letter between A and F
(inclusive).