Configuring VPN
Configuring Basic VPN Setup
Cisco CVR100W Wireless-N VPN Router Administration Guide
102
6
STEP 3
Click
Back
to return to the Basic VPN Setup page.
Configuring Basic VPN Settings
To configure basic VPN settings for a site-to-site connection:
STEP 1
Choose
VPN
>
Basic VPN Setup
.
STEP 2
Enter the following information:
Diffie-Hellman (DH)
Group
Group2 (1024 bit)
SA-Lifetime
8 Hours
Basic VPN Setup Default Values for VPN
Encryption Algorithm
AES-128
Integrity Algorithm
SHA-1
SA-Lifetime
1 Hours
PFS Key Group
DH-Group 2 (1024 bit)
Policy Name and Remote IP Type
Policy Name
Enter a unique name for the VPN policy. The VPN
policy name cannot be same as the username of an
existing VPN client.
Pre-Shared Key
Enter the pre-shared key, or password, that will be
exchanged between the two routers. It must be
between 8 and 49 characters.
Endpoint Information
Remote Endpoint
Choose the way that the remote endpoint, or the router
to which the CVR100W will connect, is identified by IP
address or FQDN (Fully-qualified Domain Name).
Remote WAN
(Internet) IP Address
Enter the public IP address or domain name of the
remote endpoint.