Home
/
Cisco
/
CVR100W
/
Administration Manual

Cisco CVR100W, Administration Manual, Page: 108 / 150

Share

Page: 108 / 150

Cisco CVR100W Administration Manual Download Page 108

Configuring VPN

Configuring Advanced VPN Setup

Cisco CVR100W Wireless-N VPN Router Administration Guide

106

6

Local ID

Choose how to specify your local gateway ID.

•

Click

Auto

to automatically to obtain the local

gateway ID.

•

Click

Manual

to enter the IP address or the fully

qualified domain name (FQDN) of the local
gateway ID.

Remote ID

Choose how to specify the remote gateway ID.

•

Click

Auto

to automatically to obtain the remote

gateway ID.

•

Click

Manual

to enter the IP address or the fully

qualified domain name (FQDN) of the remote
gateway ID.

Encryption
Algorithm

Choose the algorithm used to negotiate the Security
Association (SA): DES, 3DES, AES-128, AES-192, or
AES-256.

Authentication
Algorithm

Specify the authentication algorithm for the VPN
header: MD5, SHA-1, or SHA2-256. Ensure that the
authentication algorithm is configured identically on
both sides of the VPN tunnel (for example, the
CVR100W and the router to which it is connecting).

Pre-Shared Key

Enter the key in the space provided. Note that the
double-quote character (“) is not supported in the key.

Diffie-Hellman (DH)
Group

Specify the DH Group algorithm, which is used when
exchanging keys. The DH Group sets the strength of
the algorithm in bits. Ensure that the DH Group is
configured identically on both sides of the IKE policy.

SA-Lifetime

Enter the interval, in seconds, after which the Security
Association (SA) becomes invalid.

Dead Peer
Detection

Check

Enable

to enable this feature, or uncheck to

disable it. Dead Peer Detection (DPD) detects whether
the peer is alive or not. If the peer is detected as dead,
the router deletes the IPsec and IKE Security
Association.

«
...
106
107
108
109
110
...
»

Summary of Contents for CVR100W























































































































































Reviews:

No comments