Cisco CVR100W Administration Manual Download Page 56

Page: 56 / 150

Configuring Network

Configuring IPv6

Cisco CVR100W Wireless-N VPN Router Administration Guide

STEP 3

(Optional) If you are using 6to4 tunneling, which allows IPv6 packets to be
transmitted over an IPv4 network, do the following:

•

Click

Show Static 6to4 DNS Entry

•

In the

Domain

and

fields, enter up to 5 domain-to-IP mappings.

The 6to4 tunneling feature is typically used when a site or end user wants to
connect to the IPv6 Internet using the existing IPv4 network.

STEP 4

Click

Save

Configuring IPv6

Configuring IPv6 WAN Settings

Configuring WAN properties for an IPv6 network depends on the type of internet
connection that you have. You can configure the CVR100W to be a DHCPv6 client
of the ISP for this WAN or to use a static IPv6 address provided by the ISP.

Setting the IP Mode

To configure IPv6 WAN settings on your CVR100W, you must first set the IP mode
to LAN:IPv6, WAN:IPv6 or LAN:IPv4+IPv6, WAN:IPv4+IPv6.

See

Configuring IP Mode

for more information.

LAN:IPv4+IPv6,
WAN:IPv4

Choose this option to use IPv4 and IPv6 in the LAN
ports and IPv4 in the WAN ports.

LAN:IPv4+IPv6,
WAN:IPv4+IPv6

Choose this option to use IPv4 and IPv6 in the LAN and
WAN ports.

Summary of Contents for CVR100W























































































































































Search results

Summary of Contents for CVR100W

Reviews:

Cisco CVR100W, Administration Manual, Page: 56 / 150

Search results

Summary of Contents for CVR100W

Reviews: