Cisco CVR100W, Administration Manual, Page: 42 / 150

Configuring Network
Configuring WAN Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide 40
3
STEP 4
(Optional) To configure other optional settings, see Configuring Optional
Settings .
STEP 5
Click Save .
Configuring Static IP
If your ISP assigned you a permanent IP address, perform the following steps to
configure your WAN settings:
STEP 1
Choose Networking > WAN > Internet Setup .
STEP 2
From the Internet Connection Type drop-down menu, choose Static IP .
STEP 3
In the Static IP Settings area, enter the following information:
Keep Alive When you select this option, the Internet connection is
always on.
If you click Keep Alive , enter the number of seconds
that the CVR100W attempts to reconnect after it is
disconnected in the
Redial period field.
Authentication Type Choose the authentication type:
• Auto Negotiation: The server sends a
configuration request specifying the security
algorithm set on it. Then, the CVR100W sends
back authentication credentials with the
security type sent earlier by the server.
• PAP: The CVR100W uses the Password
Authentication Protocol (PAP) to connect to the
ISP.
• CHAP: The CVR100W uses the Challenge
Handshake Authentication Protocol (CHAP)
when connecting with the ISP.
• MS-CHAP or MS-CHAPv2: The CVR100W
uses Microsoft Challenge Handshake
Authentication Protocol when connecting with
the ISP.