Configuring Network
Configuring LAN Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide
43
3
Configuring LAN Settings
The default DHCP and TCP/IP settings work for most applications. You can assign
an IP address to each additional logical subnet on the CVR100W.
Configuring Basic LAN Settings
You can configure the CVR100W’s IP address and DHCP settings.
IPv4
To configure the default LAN IP address of the CVR100W:
STEP 1
Choose
Networking
>
LAN
>
LAN Configuration
.
STEP 2
In the
IPv4
area, enter the following information:
STEP 3
Click
Save
.
After the CVR100W’s LAN IP address is changed, your PC is no longer connected
to the CVR100W.
STEP 4
To reconnect your PC to the CVR100W, do one of the following:
•
If DHCP is configured on the CVR100W, release and renew your PC’s IP
address.
•
Manually assign an IP address to your PC. The address must be on the same
subnet as the CVR100W. For example, if you change the CVR100W’s IP
address to 10.0.0.1, assign your PC an IP address in the range of 10.0.0.2 to
10.0.0.255.
VLAN
Choose the VLAN number from the drop-down menu.
Local IP Address
Enter the LAN IP address of the CVR100W.
Make sure the address is not in use by another device.
Subnet mask
Choose the subnet mask for the new IP address from
the drop-down menu. The default subnet is
255.255.255.0.