Configuring Quality of Service (QoS)
Configuring QoS Port-Based Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide
116
7
Configuring QoS Port-Based Settings
You can configure QoS settings for each LAN port on the CVR100W. The
CVR100W supports 4 priority queues that allow for traffic prioritization per
physical switch port.
To configure QoS settings for the LAN ports:
STEP 1
Choose
QoS
>
QoS Port-Based Settings
.
STEP 2
For each port in the
QoS Port-Based Settings
table, enter the following
information:
STEP 3
Click
Save
.
STEP 4
To restore the default port-based QoS settings, click
Restore Default
. Then, click
Save
.
Trust Mode
Choose one of the following options from the drop-
down menu:
•
Port:
This setting enables the port based on
QoS. You can then set the traffic priority for a
particular port. The traffic queue priority starts
at the lowest priority of 1 and ends with the
highest priority of 4.
•
DSCP:
Differentiated Services Code Point
(DSCP). Enabling this feature prioritizes the
network traffic across the LAN based on the
DSCP queue mapping on the DSCP Settings
page.
•
CoS:
Class of Service (CoS). Enabling this
feature prioritizes the network traffic across the
LAN based on the CoS queue mapping on the
CoS Settings page.
Default Traffic
Forwarding Queue
for Untrusted
Devices
Choose a priority level for outbound traffic (1 to 4).