3-9
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 3 Installing and Configuring Cisco Secure ACS Solution Engine 4.1
Connecting to the AC Power Source
Figure 3-10
Sliding the Chassis Rail Mount Extended Tab
Step 2
Insert the chassis in the rack. See
Figure 3-11
.
Figure 3-11
Sliding Chassis onto Rack
Slide the chassis back and forth several times. Fasten with all the screws.
Warning
This product relies on the building’s installation for short-circuit (overcurrent)
protection. Ensure that
you use a fuse or circuit breaker no larger than 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL).
Statement 1005
Connecting to the AC Power Source
Warning
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the
absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Statement 1024
Connect the AC power receptacle to the AC power source with the provided power cable.
1
154628
154624