3-3
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 3 Installing and Configuring Cisco Secure ACS Solution Engine 4.1
Installing the Cisco 1113 in a Rack
The server can be installed in a system 1U rack. The rack rail components are as follows (numbers in
parentheses refer to
Figure 3-1
):
•
2 telescopic rails (1, 2)
•
Bag containing:
–
8 Round head screws with washer (3)
–
2 Round head screws (4)
–
10 Cage nuts (5)
Figure 3-1
Rack Rail Components
To install the Cisco 1113 in a rack:
1.
Attach the chassis rail mount to the chassis (see
Attaching the Chassis Rail Mount, page 3-3
).
2.
Attach the server rail to the rack assembly (see
Attaching the Server Rail, page 3-6
).
3.
Slide the chassis on to the rack assembly (see
Sliding Chassis On the Rack, page 3-8
).
Attaching the Chassis Rail Mount
You must first remove the chassis rail mount section from the server rail and attach it to the chassis.
To attach the chassis rail mount:
Step 1
See
Figure 3-2
. Extend the server rail as far as it will go. When fully extended, the server rail locks into
the extended position.
154616
1
2
3
4
5