manualshive.com logo in svg

Cisco Codec C-series, User Manual

Share
Download
Cisco Codec C-series User Manual Download Page 69

69

D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014  
Cisco Systems, Inc. All rights reserved. 

There are basically two modes of 

video conferencing; viz. MultiWay 
and MultiSite.

• 

To enable MultiWay, a MultiWay 

address must have been entered.

• 

If a MultiWay address has been 
specified and MultiWay is selected, 
MultiWay will always be used for 
video conferencing.

• 

If a MultiWay address has been 
specified, but MultiSite is selected, 
MultiSite will be used.

• 

If set to 

Auto

, MultiWay will be 

used if a MultiWay address 
has been specified, otherwise 
MultiSite will be used.

• 

If set to 

Off

, no video conferencing 

will be possible.

• 

Any use of the MultiSite feature 

requires the presence of the 
MultiSite option.

Caution! 

There is no 

Cancel

 

function letting you exit the menu 
undoing any changes you have 
made. Take care!

Settings

Administrator Settings—Multipoint Mode

About Multipoint

To exit 

Administrator 

Settings

, tap 

Back

.

To exit 

Settings

 

as such, tap 

Exit

.

Note that there 

is no 

Cancel

 

function letting 

you exit the 

menu undoing 

any changes you 

have made.

 Take care!

Summary of Contents for Codec C-series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands