manualshive.com logo in svg

Cisco Codec C-series, User Manual

Share
Download
Cisco Codec C-series User Manual Download Page 42

42

D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014  
Cisco Systems, Inc. All rights reserved. 

Contacts

Add Someone to Favorites, While in a Call

There are several ways to add 

someone to the list of Favorites and 
one of them allows you to do this 
while in a call.

You may, after a call, realize that 

you should have added the one 
you were in call with to the list of 
Favorites. To do this use 

Recents

 

and 

Add To Favorites

 from there, see 

“Call Recents” on page 40

.

About this feature

Edit the 

 entry, if needed.

In a call, tap the avatar.
In a video conference with 

several participants, tap 

the avatar that you want to 

add to Favorites.

Tap 

Add To Favorites

, 

as outlined.

Tap 

Close

, to hide the 

keyboard, as outlined.

Tap 

Save

 to 

add 

new Favorite

, as 

outlined

Summary of Contents for Codec C-series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands