manualshive.com logo in svg

Cisco Codec C-series, User Manual

Share
Download
Cisco Codec C-series User Manual Download Page 16

16

D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014  
Cisco Systems, Inc. All rights reserved. 

This feature allows you to be in a call 

with two parties, but one at a time 
only.

You may swap whom you are in call 

with, and you may connect the two 
together, while you leave the call. 

About Consult and Transfer

Locate 

whom to 

call in the 

usual way. 

Assume that 

you are in a 

call. Tap 

Hold

, 

as outlined.

Tap 

+ Place New Call

, as 

outlined, or tap 

Resume

 to go 

back to the one you were in 

call with (to undo your action).

Place the call in the 

usual way.

You are now in the new 

call while the one you 

were in call with still is 

on hold.

Tap 

Swap

 to 

go between 

the two parties 

and 

Transfer

 

to connect the 

two together, while you leave the call.

Consult and Transfer

Transfer Call

Summary of Contents for Codec C-series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands