manualshive.com logo in svg

Cisco Codec C-series, User Manual

Share
Download
Cisco Codec C-series User Manual Download Page 28

28

D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents © 2010–2014  
Cisco Systems, Inc. All rights reserved. 

Conference Calls with Multiple Participants

Lock Speaker

Start with a layout 

showing one the 

participants as the 

prominent speaker, 

and tap that 

speaker’s avatar.

Tap 

Lock as speaker

, as 

outlined.

Once activated the name 

of this field will change to 

Unlock as speaker

.

To unlock, repeat the process 

tapping 

Unlock as Speaker

 

instead.

This is an example of a layout with 

one of the participants shown as the 

prominent speaker, i.e. shown larger 

than the other(s).

In a video conference with several 
participants the one who speaks 
will, as default, be shown as the 
large image (provided you haven’t 
set up the layout otherwise). This is 
referred to as 

voice switching

.

However, you may want to keep 
showing one of the participants as 
the prominent speaker, typically 
shown larger than the others.

To make this happen activate the 

function 

Lock as speaker

, as shown 

on this page.

About Lock speaker

Summary of Contents for Codec C-series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands