73
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.
You may gain access to your video
system through its web interface, see
the Administration Guide for more.
From the web interface you may gen-
erate snapshots of the video stream
from your system. You may also
generate snapshots from the outgoing
video of the far end system.
However, you cannot take snapshots
unless you have set the
Allow Web
Snapshots
to
ON
, as shown here.
Snapshots cannot be taken if the call is
encrypted. Encryption will disable the
snapshot feature at both ends, regard-
less of the local settings of the
Allow
Web Snapshots
parameter.
The web snapshot feature applies to
Point-to-Point as well as MultiSite calls
(but to unencrypted calls only).
In this context a MultiWay call should
be regarded as a variant of Point-
to-Point call as it is the MCU who is
controlling the call and your system is
connected to the MCU as in a Point-
to-Point call.
Caution!
There is no
Cancel
function
letting you exit the menu undoing any
changes you have made. Take care!
Managing the Settings
Administrator Settings—Web Snapshots
About snapshots
To exit
Administrator
Settings
, tap
Back
.
To exit
Settings
as such, tap
Exit
.
Note that there
is no
Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!
Note!
Using your video syst
em’s web int
erface you ma
y
take snapshots of the video str
eam from your syst
em by
setting
Allow Web Snapshots
to
On
.
Observe that the far end ma
y take snapshots of the
outgoing video of y
our system, e
ven if you ha
ve set your
own
Allow Web Snapshots
to
OFF
.
Likewise, you ma
y take snapshots of the out
going video
of the far end, e
ven if the far end has set
Allow Web
Snapshots
to
OFF
, provided that y
ou have set y
our own
system’s
Allow Web Snapshots
to
ON
.
