Cisco Codec C Series User Manual Download Page 5

Page: 5 / 75

D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.

When set to

Do Not Disturb

ringtones are muted and call
attempts made by others to reach
you will appear as missed calls.

You may, however, place calls as

much as you like.

As default, there is a 60 minutes

timeout on the

Do not disturb

(after

which the system will return to
normal operation), but this may have
been changed to a different setting
by your Video Support Team.

Getting up and going

A tour of the touch screen

About Do not disturb

Tap

Dial

invoke the dial

pad.

Tap

Contacts

to invoke the

list of contacts

including

Favorites

Directory

and

History

Tap

Meetings

to invoke a list

of upcoming

scheduled

meetings.

Tap

Messages

to invoke the

voice mail

system, if

applicable.

Tap

Presentation

to start sharing

content and

conduct

presentations.

Any messages to you

while you were away

will be indicated by the

little icon in the lower

right corner.

Use the

Volume

bar to adjust

volume here (tap

and drag).

Press the

Microphone

button to mute / unmute

microphone.

Time of day.

Tap the

Camera

icon

to activate

self-view and

camera settings.

Tap the

to access

Help desk,

if available.

Tap the touch screen

to wake up the system,

if needed.

Tap a button

to activate its

function.

Scroll in lists

as outlined.

Tap here to activate /deactivate the

Do not disturb

feature, to activate /

deactivate the

Standby

feature, and

to access the

Settings

Summary of Contents for Codec C Series












































































Search results

Summary of Contents for Codec C Series

Reviews:

Related manuals for Codec C Series

Brands by name

Popular brands

Cisco Codec C Series, User Manual

Search results

Summary of Contents for Codec C Series

Reviews:

Related manuals for Codec C Series

Brands by name

Popular brands