Cisco Codec C Series User Manual Download Page 26

Page: 26 / 75

D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.

Point-to-point video calls

Adding the other party to Favorites, while in a call

There are several ways to add

someone to the list of Favorites and
one of them allows you to do this
while in a call.

You may, after a call, realize that

you should have added the one
you were in call with to the list of
Favorites. To do this use

History

and

Add To Favorites

from there.

More on this can be found in the
chapter

“Managing Contacts” on

page 49

About this feature

Edit the

entry, if needed.

Tap

Add To Favorites

as outlined.

Tap

Close

, to hide the

keyboard, as outlined.

Tap

Save

add

new Favorite

, as

outlined

In a call, tap the avatar.

Summary of Contents for Codec C Series












































































Search results

Summary of Contents for Codec C Series

Reviews:

Related manuals for Codec C Series

Brands by name

Popular brands

Cisco Codec C Series, User Manual

Search results

Summary of Contents for Codec C Series

Reviews:

Related manuals for Codec C Series

Brands by name

Popular brands