5-17
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Setting Up IOS Access Points
In the Global Properties section:
a.
Select
Enable
.
b.
Enter the Wireless Domain Services priority. This value determines which
access point will serve as the active WDS when multiple access points are
configured to run WDS on the same subnet. Valid priority values are 1-255,
with 255 being the highest.
c.
Enter the WLSE’s IP address in the WNM IP Address field.
Step 5
Configure a server group for authenticating the SWAN infrastructure
components.
In the Server Groups section:
a.
Enter one or more server names or server IP addresses.
b.
Under Use Group For, select Infrastructure Authentication.
c.
Click
Save
.
Step 6
The WDS access point must also register and authenticate itself to the WDS to
participate in the SWAN hierarchy, so the WDS AP is also an infrastructure AP.
To authenticate and register the WDS AP as an infrastructure AP:
a.
Select
Wireless Services > AP Configuration
.
b.
Select
Enabled
as the Wireless Services option.
c.
Enter a username and password that can be LEAP authenticated by the AAA
servers in the infrastructure server group.
Step 7
(Optional) Select
Preview
to see a preview of the configuration template.
Step 8
Select
Save
, then click the
Save
button.
Step 9
Select
Yes
to apply the template immediately or select
No
to save the template.
For information on configuration jobs, see the “Managing Device Configuration”
chapter in the
User Guide for the CiscoWorks Wireless LAN Solution Engine,
Release 2.7
.
Note
To configure authentication for wireless clients, see the relevant AP
documentation.
