Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual Download Page 130

Page: 130 / 144

Appendix A Installing Software—CiscoWorks 1105/1130/1130-19

Upgrade Methods

A-10

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

78-16345-01

Note

The virtual drive (f: in this example) will be removed after you reboot the
Windows 2000, Windows NT, or Windows XP server.

Step 3

Double-click the virtual drive icon. Then, double-click the autorun.bat file if it
does not automatically run.

A browser window opens and displays the Appliance Update screen. Minimize
this window.

Step 4

Go to

Install the Software, page A-10

Install the Software

In this procedure, you define the repository and install the software.

Procedure

Step 1

Step 2

Enter install mode:

install

install:

Step 3

Define the repository.

•

To define a local repository, enter the following command:

install:

configure default

•

To define a remote repository, enter the following command:

install:

configure URL

RL_value

where

URL_value

is the HTTP URL of the remote repository. For example:

install:

configure URL http://209.165.200.224:9851

Step 4

To view a list of the software images and updates available for installation, enter
the following command:

Summary of Contents for CiscoWorks Wireless LAN Solution Engine

















































































































































Search results

Summary of Contents for CiscoWorks Wireless LAN Solution Engine

Reviews:

Related manuals for CiscoWorks Wireless LAN Solution Engine

Brands by name

Popular brands

Cisco CiscoWorks Wireless LAN Solution Engine, Installation And Configuration Manual

Search results

Summary of Contents for CiscoWorks Wireless LAN Solution Engine

Reviews:

Related manuals for CiscoWorks Wireless LAN Solution Engine

Brands by name

Popular brands