Preface
Organization
SCE 2000 4xGBE Installation and Configuration Guide
vi
OL-7824-02
Organization
The major sections of this guide are as follows:
Chapter Title
Description
1
Introduction
(on page
1-1
) This chapter provides a brief introduction to Cisco Service
Control.
2
Overview
( on page
2-1
)
This chapter provides a hardware overview of the
SCE
2000
platform.
3
Topology
(on page
3-1
)
This chapter describes the possible deployment topologies
of the
SCE 2000
and explains how various aspects of the
topology determine the configuration of the system.
4
Installation and
Maintenance
(on page
4-
1
)
This chapter explains how to install a
SCE 2000
platform
in a rack or in a general tabletop installation and how to
install or replace the power supply units and fan modules.
5
Connecting the
Management Interfaces
and Performing Initial
System Configuration
(on
page
5-1
)
This chapter explains how to connect the
SCE 2000
platform to a local console and perform the initial system
configuration via the setup wizard that runs automatically.
6
Cabling the Line Ports
and Completing the
Installation
(on page
6-1
)
This chapter provides instructions for cabling the Gigabit
Ethernet ports for both one and two
SCE 2000
topologies,
and for configuring Gigabit Ethernet (GBE) interface
parameters. In a topology utilizing two
SCE 2000
s
(cascade), this includes the cascade ports as well as the
line ports.
7
Basic SCE 2000 Platform
Operations
(on page
7-1
)
This chapter describes how to start up the
SCE 2000
platform, reboot, and shutdown. It also describes how to
manage configurations.
8
Troubleshooting
(on page
8-1
)
This chapter provides basic system startup troubleshooting
information.
A
The External Optical
Bypass Module
(on page
A-1
)
This appendix explains how to install the external optical
bypass module.
