Appendix A The External Optical Bypass Module
Installing the External Bypass Module
SCE 2000 4xGBE Installation and Configuration Guide
A-8
OL-7824-02
Bypass module is now active (in bypass), and is performing a loopback on these interfaces.
Step 6
Connect the control cable (supplied in the kit) from the
Bypass
9-pin D-Type connector
on the rear panel of the
SCE 2000
platform to the
Control
connector on the External
Optical Bypass module.
The
SCE 2000
platform immediately starts providing power to the External Optical Bypass module, so the
bypass module becomes inactive, and starts transferring the traffic to the
SCE 2000
platform. The “
No
Bypass
” LED should therefore be lit.
The figure below illustrates the connections between a
SCE 2000
platform and two External
Optical Bypass modules.
