Purpose
Command or Action
Decrypts the private-config file and saves the file in plane
format.
write memory
Example:
Step 4
Device#
write memory
Verifying the Status of Encryption
Use the
show parser encrypt file status
command to verify the status of encryption. The following command
output indicates that the feature is available but the file is not encrypted. The file is in ‘plain text’ format.
Device#
show parser encrypt file status
Feature: Enabled
File Format: Plain Text
Encryption Version: Ver1
Feature Information for Secure Storage
This table provides release and related information for the features explained in this module.
These features are available in all the releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature Information
Feature
Release
Secure Storage feature allows you to secure critical
configuration information by encrypting it. It
encrypts asymmetric key-pairs, pre-shared secrets,
the type 6 password encryption key and certain
credentials. An instance-unique encryption key is
stored in the hardware trust anchor to prevent it
from being compromised.
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Secure Storage
Cisco IOS XE Everest 16.5.1a
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
Secure Storage
Cisco IOS XE Fuji 16.8.1a
Use the Cisco Feature Navigator to find information about platform and software image support. To access
Cisco Feature Navigator, go to
.
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
253
Configuring Secure Storage
Verifying the Status of Encryption
