Purpose
Command or Action
Example:
Router(config-ecfm-srv)# alias MA6
•
alias-short-ma-name
—
a string of no more than 100 characters that
identifies the MAID.
•
icc icc-code meg-id
—
specify the ITU Carrier Code (ICC) (maximum:
6 characters) and Unique Maintenance Entity Group (MEG) ID Code
(UMC). The maximum characters allowed is 12.
•
number ma-number
—
a value from 0 to 65535.
•
vlan-id
—
VLAN range is from 1 to 4094. You cannot use the same
VLAN ID for more than one domain at the same level.
•
vpn-id
—
enter a VPN ID as the
ma-name
.
The
alias
command is enabled only for the MEPs with service
direction as Up.
Note
Verifying the Configuration of Multi-UNI CFM MEPs in the Same VPN
Use the following commands to verify the configuration:
•
Use the
show ethernet cfm maintenance-point local
command to verify the Multi-UNI CFMs over
EVC configuration. This command shows the basic configuration information for Multi-UNI CFM.
Router# show ethernet cfm maintenance-points local
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name
Lvl
MacAddress
Type
CC
Ofld Domain Id
Dir
Port
Id
MA Name
SrvcInst
Source
EVC name
--------------------------------------------------------------------------------
30
MD6
6
88f0.7768.2180 BD-V
Y
No
MD6
Up
Gi0/0/0
30
MA1
30
Static
evc30
40
MD6
6
88f0.7768.2185 BD-V
Y
No
MD6
Up
Gi0/0/5
40
MA2 (MA1)
40
Static
evc40
Total Local MEPs: 2
Local MIPs: None
•
The sample output of the following
show ethernet cfm maintenance-point remote
command includes
entries that match services with the configured MA name with
alias
not configured and services with
matching configured MA alias.
Router# show ethernet cfm maintenance-point remote
--------------------------------------------------------------------------------
MPID
Domain Name
MacAddress
IfSt
PtSt
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
274
Configuring Ethernet CFM
Verifying the Configuration of Multi-UNI CFM MEPs in the Same VPN
