Purpose
Command or Action
Displays the MAC security status of a specific
service instance.
show ethernet service instance id id
interface type
number
mac security
Example:
Device# show ethernet service instance id 100
interface gigabitethernet1/1 mac security
Step 2
Returns to user EXEC mode.
end
Example:
Device# end
Step 3
Displaying the Service Instances with MAC Security Enabled
Perform this task to display all the service instances with MAC security enabled.
SUMMARY STEPS
1.
enable
2.
show ethernet service instance mac security
3.
end
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays all the service instances with MAC security
enabled.
show ethernet service instance mac security
Example:
Device# show ethernet service instance mac
security
Step 2
Returns to user EXEC mode.
end
Example:
Device# end
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
107
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Displaying the Service Instances with MAC Security Enabled
