Cisco Aironet 1200 Series, Hardware Installation Manual

Page: 67 / 138

6-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-8370-04
Chapter 6 Troubleshooting Autonomous Access Points
Checking the Top Panel LEDs
Table 6-1 Top Panel LED Signals
Message
type Ethernet
LED Status
LED Radio
LED Meaning
Boot loader
status Green – Green DRAM memory test.
– Amber Red Board initialization test
– Blinking
green Blinking
green Flash memory test.
Amber Green – Ethernet initialization test.
Green Green Green Starting Cisco IOS.
Association
status – Green – At least one wireless client device is
associated with the unit.
– Blinking
green – No client devices are associated; check the
unit’s SSID and WEP settings.
Operating
status – Green Blinking
green Transmitting/receiving radio packets.
Green – – Ethernet link is operational.
Blinking
green – – Transmitting/receiving Ethernet packets.
Boot Loader
Errors Red – Red DRAM memory test failure.
– Red Red File system failure.
Red Red – Ethernet failure during image recovery.
Amber Green Amber Boot environment error.
Red Green Red No Cisco IOS image file.
Amber Amber Amber Boot failure.
Operation
Errors – Green Blinking
amber Maximum retries or buffer full occurred on
the radio.
Blinking
amber - – Transmit/receive Ethernet errors.
– Blinking
amber – General warning.
Configuration
Reset – Amber – Resetting the configuration options to
factory defaults.
Failure Red Red Red Firmware failure; try disconnecting and
reconnecting unit power.
Firmware
Upgrade – Red – Loading new firmware image.