5-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-8370-04
Chapter 5 Upgrading the 5-GHz Radio Module
Removing a 5-GHz Radio Module
Step 3
Remove the 5-GHz access cover using the supplied Torx L-wrench (see
Figure 5-1
).
Figure 5-1
5-GHz Radio Access Cover
Removing a 5-GHz Radio Module
To remove the 5-GHz radio module, follow these steps:
Step 1
Remove all cables and power connections from the access point.
Step 2
Place the access point on a flat surface so that the unit is upright with the front end facing you.
Step 3
Unscrew the two mounting screws using the supplied Torx L-wrench (
Figure 5-2
).
Figure 5-2
5-GHz Radio Module
Note
Do not attempt to remove the mounting screws from the module; they are captured in the module
housing.
1
Access Cover Screws
2
Access Cover
1
1
2
74632
1
Mounting screws
3
Access point
2
5-GHz radio module antenna
74631
1
1
2
3
