Cisco 8832 Administration Manual Download Page 189 | Manualshive

Page: 189 / 190

background image

C H A P T E R

14

International User Support

•

Unified Communications Manager Endpoints Locale Installer, on page 179

•

International Call Logging Support, on page 179

•

Language Limitation, on page 180

Unified Communications Manager Endpoints Locale Installer

By default, Cisco IP Phones are set up for the English (United States) locale. To use the Cisco IP Phones in
other locales, you must install the locale-specific version of the Unified Communications Manager Endpoints
Locale Installer on every Cisco Unified Communications Manager server in the cluster. The Locale Installer
installs the latest translated text for the phone user interface and country-specific phone tones on your system
so that they are available for the Cisco IP Phones.

To access the Locale Installer required for a release, access

https://software.cisco.com/download/

navigator.html?mdfid=286037605&flowid=46245

, navigate to your phone model, and select the Unified

Communications Manager Endpoints Locale Installer link.

For more information, see the documentation for your particular Cisco Unified Communications Manager
release.

The latest Locale Installer may not be immediately available; continue to check the website for updates.

Note

Related Topics

Cisco Unified Communications Manager Documentation

, on page 12

International Call Logging Support

If your phone system is configured for international call logging (calling party normalization), the call logs,
redial, or call directory entries may display a plus (+) symbol to represent the international escape code for
your location. Depending on the configuration for your phone system, the + may be replaced with the correct
international dialing code, or you may need to edit the number before dialing to manually replace the + with
the international escape code for your location. In addition, while the call log or directory entry may display
the full international number for the received call, the phone display may show the shortened local version of
the number, without international or country codes.

Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager

179

«
...
187
188
189
190
»

Summary of Contents for 8832































































































































































































Reviews:

No comments

Related manuals for 8832

Brand: Fairphone Pages: 22

Brand: TCL Pages: 34

Brand: TCL Pages: 38

Brand: TCL Pages: 26

Brand: TCL Pages: 10

PARTNER II Release 4.1

Brand: Lucent Technologies Pages: 363

Brand: Kyocera Pages: 56

Verizon CDM-9500

Brand: Audiovox Pages: 146

Premium Reflexes OmniPCX 4400

Brand: Alcatel Pages: 62

Brand: JiangYi Pages: 13

2 VOICE 1083/58

Brand: urmet domus Pages: 60

Brand: iPECS Pages: 101

Brand: Samsung Pages: 193

Brand: Samsung Pages: 259

Brand: Samsung Pages: 365

SGH-T519 - Trace Cell Phone

Brand: Samsung Pages: 210

Brand: Xiaomi Pages: 50

Brand: Xiaomi Pages: 101

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands