Cisco 8832 Administration Manual Download Page 138

Page: 138 / 190

Possible Explanation and Action

Description

Message

Occurs if you attempt to install a version
of software on this phone that did not
support hardware changes on this phone.

Check the load ID that is assigned to the
phone (from Cisco Unified
Communications Manager, choose

Device

Phone

). Reenter the load that

displays on the phone.

The application that was downloaded is not
compatible with the phone hardware.

Load Rejected HC

If the phone has a static IP address, verify
that the default router is configured.

If you are using DHCP, the DHCP server
has not provided a default router. Check
the DHCP server configuration.

DHCP or static configuration did not
specify a default router.

No Default Router

If the phone has a static IP address, verify
that the IPv4 DNS server is configured.

If you are using DHCP, the DHCP server
has not provided a IPv4 DNS server. Check
the DHCP server configuration.

A name was specified but DHCP or static
IP configuration did not specify a IPv4
DNS server address.

No IPv4 DNS Server

If the phone has a static IP address, verify
that the IPv6 DNS server is configured.

If you are using DHCP, the DHCP server
has not provided a IPv6 DNS server. Check
the DHCP server configuration.

A name was specified but DHCP or static
IP configuration did not specify a IPv6
DNS server address.

No IPv6 DNS Server

The trust list is not configured on the Cisco
Unified Communications Manager, which
does not support security by default.

The trust list is not configured.

For more information about trust lists, see
the documentation for your particular Cisco
Unified Communications Manager release.

The CTL file or the ITL file is not installed
on the phone.

No Trust List Installed

Update the certificate.

FIPS requires that the RSA server
certificate is 2048 bits or greater.

Phone failed to register. Cert key size is not
FIPS compliant.

Configuration changes were likely made to
the phone in Cisco Unified
Communications Manager, and

Apply

Config

was pressed so that the changes take

effect.

The phone is restarting due to a request
from Cisco Unified Communications
Manager.

Restart requested by Cisco Unified
Communications Manager

Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager

128

Cisco IP Conference Phone Troubleshooting

Status Messages Fields

Summary of Contents for 8832































































































































































































Search results

Summary of Contents for 8832

Reviews:

Brands by name

Popular brands

Cisco 8832, Administration Manual

Search results

Summary of Contents for 8832

Reviews:

Brands by name

Popular brands