Cisco 7941G - Unified IP Phone VoIP, Administration Manual

Page: 85 / 302

3-9
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
Step 4
Connect a Category 3 or 5
straight-through Ethernet cable
from the switch to the network
port labeled 10/100 SW on the
Cisco Unified IP Phone
7961G/7941G, or to the network
port labeled 10/100/1000 SW on
the Cisco Unified IP Phone
7961G-GE/7941G-GE. Each Cisco Unified
IP Phone ships with one
Ethernet cable in the box. See the “Network and
Access Ports” section on
page 3-3
for guidelines.
Step 5 Connect a Category 3 or 5
straight-through Ethernet cable
from another network device,
such as a desktop computer, to
the access port labeled 10/100
PC port on the
Cisco Unified IP Phone
7961G/7941G, or to the access
port labeled 10/100/1000 PC on
the Cisco Unified IP Phone
7961G-GE/7941G-GE. Optional. You can connect
another network device later
if you do not connect one
now. See the “Network and
Access Ports” section on
page 3-3
for guidelines.
Table 3-1 Installing the Cisco Unified IP Phone (continued)
Procedure Notes Reference