Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phone
4-4
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
To unlock or lock options, press
**#
. This action either locks or unlocks the
options, depending on the previous state.
Note
If a Settings Menu password has been provisioned, SIP phones present an “Enter
password” prompt after you enter **#.
Make sure to lock options after you have made your changes.
Caution
Do not press
**#
to unlock options and then immediately press
**#
again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press
**#
again.
Related Topics
•
Displaying a Configuration Menu, page 4-2
•
Editing Values, page 4-4
•
Overview of Options Configurable from a Phone, page 4-5
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-16
Editing Values
When you edit the value of an option setting, follow these guidelines:
•
Use the keys on the keypad to enter numbers and letters.
•
To enter letters by using the keypad, use a corresponding number key. Press
the key one or more times to display a particular letter. For example, press the
2 key once for “a,” twice quickly for “b,” and three times quickly for “c.”
After you pause, the cursor automatically advances to allow you to enter the
next letter.
•
To enter a period (for example, in an IP address), press the
.
(period) softkey
or press
*
on the keypad.
•
Press the
<<
softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.
Summary of Contents for 7941G - Unified IP Phone VoIP
Page 4: ......
