7-2
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Telephony Features Available for the Phone
Table 7-1
describes supported telephony features, that you can configure using
Cisco Unified Communications Manager Administration for the Cisco Unified Wireless
IP Phone 7921G. The table provides references to documentation that contains configuration procedures
and feature information.
For information about using the features on the phone, refer to
Cisco Unified Wireless IP Phone 7921G
Phone Guide and Quick Reference for Cisco Unified Communications Manager 4.3, 5.1, 6.0, 6.1, and
7.0(1)
. For a comprehensive listing of features on the phone, refer to
Cisco Unified IP Phone Features
A-Z
.
Note
Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information about service parameters
and the functions that they control, you can use the
I or ? button
on the Cisco Unified Communications
Manager configuration page.
Table 7-1
Telephony Features for the Cisco Unified Wireless IP Phone 7921G
Feature
Description Configuration
Reference
Abbreviated
Dialing
Allows users to speed dial a phone number by entering an
assigned code (1-99) on the phone keypad. Users assign the
codes from the User Options web pages.
See
Speed dial, page 7-13
for more information.
For more information, refer to:
•
Cisco Unified Communications
Manager Administration Guide,
“
Cisco Unified IP Phone
Configuration” chapter.
•
Cisco Unified Communications
Manager System Guide, “
Cisco
Unified IP Phone” chapter.
Auto Answer
Connects incoming calls automatically after a ring or two
to the speakerphone or headset if attached.
For more information, refer to the
Cisco
Unified Communications Manager
Administration Guide:
•
For Cisco Unified Communications
Manager 5.0 or later, refer to the
“
Configuring Directory Numbers”
chapter.
•
For Cisco Unified Communications
Manager 4.x, refer to the “Phone
Configuration” chapter.
Auto-pickup
Allows a user to use one-touch, pickup functionality for
call pickup, group call pickup, and other group call pickup.
For more information, refer to
Cisco
Unified Communications Manager
Features and Services Guide
, “Call Pickup
Group Configuration” chapter.
