4-16
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Configuring Network Profiles
Note
If you use domains within your network, you must enter the username with the domain name, in this
format: domain\username.
For information about setting security credentials, see these topics:
•
Configuring the Username and Password, page 4-16
•
Configuring the Pre-shared Key, page 4-16
•
Setting Wireless Encryption, page 4-18
Configuring the Username and Password
To enter or change the username or password for the network profile, you must use the same username
and the same password string that is configured in the RADIUS server. The maximum length of the
username or password entry is 32 characters.
To set up the username and password in Wireless Security Credentials, follow these steps:
Procedure
Step 1
Choose the network profile.
Step 2
In the Username field, enter the network username for this profile.
Step 3
In the Password field, enter the network password string for this profile.
Step 4
Click Save to make the change.
Configuring the Pre-shared Key
When using Auto (AKM) with WPA Pre-shared key or WPA2 with Pre-shared key for authentication,
you must configure a Passphrase/Pre-shared key in the Wireless Security Credentials area.
Pre-shared Key Formats
The Cisco Unified Wireless IP Phone 7921G supports ASCII and hexadecimal formats. You must use
one of these formats when setting up a WPA Pre-shared key:
Hexadecimal
For hexadecimal keys, you must enter 64 hex digits (0-9 and/or A-F); for example,
AB123456789CD01234567890EFAB123456789CD01234567890EF3456789C
ASCII
For ASCII keys, you must enter a character string that uses 0-9, A-Z (upper and lower case), including
symbols and is from 8 to 63 characters in length; for example, GREG12356789ZXYW
