5-21
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring TFTP Options
Step 8
Press
Validate
.
Step 9
Press
Save
.
Cisco IP Phone 7910
Procedure
Step 1
Press
settings
.
Step 2
Press
6
(Network Configuration).
Step 3
Use the
down
volume key to select
Admin VLAN ID
setting.
Step 4
Press
*
to edit.
Step 5
Use the buttons on the dial pad to enter the new Admin VLAN ID, using the
down
arrow to backspace.
Step 6
Press
#
to
save.
Configuring TFTP Options
If you do not use DHCP to direct the Cisco IP Phone 7960 to a TFTP server, you
must manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP.
This section covers these topics:
•
Assigning a TFTP Sever, page 5-21
•
Using an Alternate TFTP Server, page 5-23
Assigning a TFTP Sever
The default TFTP server is set to CiscoCM1
.
If you are not using DHCP in your
network, and you want to change this setting, you must manually assign the TFTP
server to the phone.