Cisco 7910 Series Administration Manual Download Page 80

Page: 80 / 150

Chapter 5 Configuring Network Settings on the Cisco IP Phone

Verifying Network Settings

5-6

Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910

78-10453-04

Information URL

Specifies the location (UL) of the help
text for the information (

) button.

Available only on the
Cisco IP Phone 7960/7940.

Cannot configure locally. Use
Cisco CallManager to modify.

Directories URL

Specifies the server from which the
phone obtains directory information.

Available only on the
Cisco IP Phone 7960/7940.

Cannot configure locally. Use
Cisco CallManager to modify.

Messages URL

Specifies the message services URL.

Available only on the
Cisco IP Phone 7960/7940.

Cannot configure locally. Use
Cisco CallManager to modify.

Services URL

Specifies the location (URL) for
Cisco IP Phone Services.

Available only on the
Cisco IP Phone 7960/7940.

Cannot configure locally. Use
Cisco CallManager to modify.

DHCP Enabled

Indicates whether DHCP is being used
by the phone.

See the

“Modifying DHCP

Settings” section on page 5-9

DHCP Address
Released

Allows the IP-address assigned by
DHCP to be released.

See the

“Releasing a DHCP

Address” section on page 5-12

Alternative TFTP

Indicates whether the phone is using an
alternative TFTP server.

See the

“Using an Alternate TFTP

Server” section on page 5-23

Erase configuration

Allows you to erase all locally-assigned
settings on the phone and reset values to
the default settings.

See the

“Erasing Local

Configuration” section on
page 7-13

Table 5-1

Network Settings (continued)

Network Setting

Description

Usage Notes

Summary of Contents for 7910 Series























































































































































Search results

Summary of Contents for 7910 Series

Reviews:

Related manuals for 7910 Series

Brands by name

Popular brands

Cisco 7910 Series, Administration Manual

Search results

Summary of Contents for 7910 Series

Reviews:

Related manuals for 7910 Series

Brands by name

Popular brands