Cisco 7910 Series Administration Manual Download Page 105

Page: 105 / 150

6-3

Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910

78-10453-04

Chapter 6 Configuring Cisco IP Phones, Users, and Features in Cisco CallManager

Configuring Cisco IP Phones in Cisco CallManager

Caller ID

Displays number and name of caller

From Cisco CallManager, choose:

Device > Phone

to select outgoing

caller ID pattern and to select
whether to transmit or block caller ID
information.

Conference

Initiates an ad hoc conference and then
conference in other participants one at a
time.

From Cisco CallManager, choose:

Service > Media Resource >
Conference Bridge

to configure

device to support conferences.

Extension Mobility

Enables users to sign into their
directory number from any Cisco IP
Phone

From Cisco CallManager, choose:

Device > Phone

Forward

Forwards all calls to the designated
directory number

From Cisco CallManager, choose:

Device > Phone

and select the

directory number to configure. You
can configure Forward All, Forward
Busy, or Forward No Answer.

Users can also designate the forward
numbers in the Cisco IP Phone
Configuration windows.

Group call pickup

Allows users to pick up incoming calls
within their own group or in other
groups

From Cisco CallManager, choose:

Feature > Call Pickup

to configure.

From Cisco CallManager, choose:

Device > Phone

and select the

directory number to assign a call
pickup group.

Hold

Places an active call on hold

This feature requires no
configuration to work, unless you
want to use music on hold.

Meet-Me conference

Enables other callers to join in a
conference

From Cisco CallManager, choose:

Service > Conference Bridge

configure Meet-Me parameters.

Table 6-1

Configuring Telephony Features Using Cisco CallManager (continued)

Feature

Description Configuration

Tips

Summary of Contents for 7910 Series























































































































































Search results

Summary of Contents for 7910 Series

Reviews:

Related manuals for 7910 Series

Brands by name

Popular brands

Cisco 7910 Series, Administration Manual

Search results

Summary of Contents for 7910 Series

Reviews:

Related manuals for 7910 Series

Brands by name

Popular brands