Cisco 6160, Hardware Installation Manual

Page: 16 / 20

2-16
Cisco 6160 Hardware Installation Guide
OL-2190-02 B0
Chapter 2 Preparing for Installation
Required Tools and Equipment
2.3 Required Tools and Equipment
Table 2-4 lists the tools and equipment you need to install and connect the Cisco 6160 system.
Table 2-4 Tool and Equipment Requirements Checklist
Check Tools and Equipment
Hardware Components and Cables
Cisco 6160 chassis, which will have the following components already installed:
•
Line cards (one or more types):
– 8xIDSL.
–
8xG.SHDSL.
– 8xDMT.
–
4xSDSL.
– 4xflexi.
•
One of the following NI-2 cards:
– DS3+T1/E1 IMA.
–
DS3/2DS3.
– OC-3c/2DS3 SMF
1
or MMF
2
.
–
OC-3c/OC-3c SMF or MMF.
• One of the following I/O cards:
–
DS3/2DS3+8xT1 I/O card.
– DS3/2DS3 I/O card.
Note
The I/O card should ship with an EMI cover, screws, standoff screws, and washers.
•
PEM(s).
• Blower tray.
•
Blank faceplates, as necessary.
Third-party POTS splitters can be installed in a Cisco 6160 with a POTS splitter
configuration. Please verify the compatibility with your Cisco representative.
Telco cables with Champs connectors for the following configurations:
•
Cisco 6160 with a POTS splitter configuration.
– Cisco 6160 to third-party POTS splitter connections.
–
Third-party POTS splitter to MDF
3
connections.
• Cisco 6160 without POTS splitter connections.
–
Cisco 6160 to MDF.
Note See Appendix B, “Cable and Port Mapping Specifications” for a port mapping table
for the subscriber connections. Refer to the third-party POTS splitter documentation
for cable specifics.