B-11
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix B Catalyst 3750 Switch Debug Commands
debug eap
debug eap
Use the
debug eap
privileged EXEC command to enable debugging of the Extensible Authentication
Protocol (EAP) activity. Use the
no
form of this command to disable debugging.
debug dot1x
{
all
|
authenticator
|
errors
|
events
|
md5
|
packets
|
peer
|
sm
}
no debug dot1x
{
all
|
authenticator
|
errors
|
events
|
md5
|
packets
|
peer
|
sm
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug dot1x
command is the same as the
no debug dot1x
command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the
session
switch-number
privileged
EXEC command. Then enter the
debug
command at the command-line prompt of the stack member. You
also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
all
Display all EAP debug messages.
authenticator
Display authenticator debug messages.
errors
Display EAP error debug messages.
events
Display EAP event debug messages.
md5
Display EAP-MD5 debug messages.
packets
Display EAP packet debug messages.
peer
Display EAP peer debug messages.
sm
Display EAP state-machine related-events debug messages.
Release
Modification
12.2(25)SEE
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
Displays EAP registration and session information for the switch or for the
specified port.
