C-42
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix C Catalyst 3750 Switch Show Platform Commands
show platform tb
show platform tb
Use the
show platform tb
privileged EXEC command to display platform-dependent trusted-boundary
information during a stack master change to a new stack master.
show platform tb [ |
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show platform tb
command:
Switch#
show platform tb
Print TB sub-block information
(Fa1/0/2) device:(Cisco phone)
/* current interfaces with TB enabled, and the trust device type */
Current master switch:(Yes)
/* Is this switch the current master switch? */
New elected master :(No)
/* Is the master switch-over occurred and this is the new master switch? */
Master ready :(No)
/* Is the Master switch in ready state? */
HULC TB process on :(No)
/* Is the TB platform process currently running? */
CDP stable timer ON :(No)(360 secs)
/* Is the CDP stable timer running? After the CDP stable timer expired, CDP neighbors of
all the TB enabled interfaces will be verified to make sure the replacement of IP phone
and PC did not happen during the master switch-over. */
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.1(14)EA1
This command was introduced.