B-46
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix B Catalyst 3750 Switch Debug Commands
debug platform frontend-controller
debug platform frontend-controller
Use the
debug platform frontend-controller
privileged EXEC command to enable debugging of
front-end controller activity. Use the
no
form of this command to disable debugging.
debug
platform frontend-controller
{
all
|
image
|
led | manager | poe | register | thermal
}
no debug platform frontend-controller
{
all
|
image
|
led | manager | poe | register | thermal
}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command is only supported on Power over Ethernet switches.
The
undebug platform frontend-controller
command is the same as the
no debug platform
frontend-controller
command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, start a session from the stack master by using the
session
switch-number
privileged EXEC
command. Then enter the
debug
command at the command-line prompt of the stack member. You can
also use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
all
Display all the debug messages for front-end controller.
image
Display Image Manager debug messages.
led
Display LED debug messages.
manager
Display front-end-controller manager debug messages.
poe
Display Power over Ethernet (PoE) debug messages.
register
Display Register Access debug messages.
thermal
Display thermal debug messages.
Release
Modification
12.2(20)SE3
This command was introduced.
