manualshive.com logo in svg

Cisco 2975 - Catalyst LAN Base Switch, Software Configuration Manual

The Cisco 2975 Catalyst LAN Base Switch offers streamlined network management with robust features. Enhance your networking capabilities with ease by downloading the user manual from our website, completely free. Explore in-depth specifications and configurations to maximize the potential of this cutting-edge Cisco switch.

Share
Download
background image

 

6-11

Catalyst 2975 Switch Software Configuration Guide

OL-19720-02

Chapter 6      Managing Switch Stacks

Understanding Stacks

You can use the 

archive-download-sw /allow-feature-upgrade

 privileged EXEC command to 

allow installing an image with a different feature set.

Auto-Upgrade and Auto-Advise Example Messages

When you add a switch that has a different minor version number to the stack, the software displays 
messages in sequence (assuming that there are no other system messages generated by the switch). 

This example shows that the stack detected a new switch that is running a different minor version number 
than the stack. Auto-copy launches, finds suitable software to copy from a member to the switch in 
version-mismatch mode, upgrades the switch in version-mismatch mode, and then reloads it:

*Mar 11 20:31:19.247:%STACKMGR-6-STACK_LINK_CHANGE:Stack Port 2 Switch 2 has changed to 

state UP

*Mar 11 20:31:23.232:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack 

(VERSION_MISMATCH)

*Mar 11 20:31:23.291:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack 

(VERSION_MISMATCH) (Stack_1-3)

*Mar 11 20:33:23.248:%IMAGEMGR-6-AUTO_COPY_SW_INITIATED:Auto-copy-software process 

initiated for switch number(s) 1

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Searching for stack member to act

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:as software donor...

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Found donor (system #2) for

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:member(s) 1

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System software to be uploaded:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System Type:            0x00000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving c2975-lanbase-mz.122-46.EX 

(directory)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving 

c2975-lanbase-mz.122-46.EX/c2975-lanbase-mz.122-46.EX.bin (4945851 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving c2975-lanbase-mz.122-46.EX/info 

(450 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:examining image...

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting c2975-lanbase-mz.122-46.EX/info 

(450 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Stacking Version Number:1.4

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System Type:            0x00000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Ios Image File Size:  0x004BA200

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Total Image File Size:0x00818A00

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Minimum Dram required:0x08000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Suffix:universalk9-122-53.SE

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Directory:c2975-lanbase-mz.122-46.EX

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Name:c2975-lanbase-mz.122-46.EX

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image 

Feature:IP|LAYER_3|PLUS|MIN_DRAM_MEG=128

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Old image for switch 

1:flash1:c2975-lanbase-mz.122-46.EX

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Old image will be deleted after download.

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Extracting images from archive into flash on 

switch 1...

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:c2975-i5-mz.122-0.0.313.EX (directory)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting 

c2975-i5-mz.122-0.0.313.EX/c2975-lanbase-mz.122-46.EX (4945851 bytes)

Summary of Contents for 2975 - Catalyst LAN Base Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2975 - Catalyst LAN Base Switch

Fairchild FSD200 Manual preview
FSD200
Brand: Fairchild Pages: 14
H3C S12500G-AF Series Installation Manual preview
S12500G-AF Series
Brand: H3C Pages: 105
Canoga Perkins HS8000 Quick Start Manual preview
HS8000
Brand: Canoga Perkins Pages: 7
GarrettCom PS14H-48VDC Installation And User Manual preview
PS14H-48VDC
Brand: GarrettCom Pages: 77
Televes 719601 User Manual preview
719601
Brand: Televes Pages: 24
KYLAND Ruby3A Hardware Installation Manual preview
Ruby3A
Brand: KYLAND Pages: 34
TRENDnet TEG-S80Dg Brochure & Specs preview
TEG-S80Dg
Brand: TRENDnet Pages: 2
Perle IDS-105FE Series Installation Manual preview
IDS-105FE Series
Brand: Perle Pages: 2
A SYSTEMS AV800HD User Manual preview
AV800HD
Brand: A SYSTEMS Pages: 80
Lindy CONNECTION PERFECTION 32797 User Manual preview
CONNECTION PERFECTION 32797
Brand: Lindy Pages: 10
CityGrow Systems CG800 Series User Manual preview
CG800 Series
Brand: CityGrow Systems Pages: 21
Gefen EXT-UHD600-41 User Manual preview
EXT-UHD600-41
Brand: Gefen Pages: 136
iNels RFSAI-62B Quick Start Manual preview
RFSAI-62B
Brand: iNels Pages: 7
EnGenius EWS-series EWS2910P-Kit-300 Quick Installation Manual preview
EWS-series EWS2910P-Kit-300
Brand: EnGenius Pages: 6
Panduit Atlona JunoX 451 Installation Manual preview
Atlona JunoX 451
Brand: Panduit Pages: 8
Oracle Sun Network QDR InfiniBand Gateway Switch Service Manual preview
Sun Network QDR InfiniBand Gateway Switch
Brand: Oracle Pages: 96
ZIEHL-ABEGG S-ET Series Operating Instructions Manual preview
S-ET Series
Brand: ZIEHL-ABEGG Pages: 12
Raritan Dominion KX II Quick Setup Manual preview
Dominion KX II
Brand: Raritan Pages: 7

Brands by name

Popular brands

Load more brands