VCC-16MV02
Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
4
1.
Handling Precautions
The camera must not be used for any nuclear equipment or aerospace equipment with which mechanical failure or malfunction
could result in serious bodily injury or loss of human life. Our warranty does not apply to damages or defects caused by
irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
・
Do not use or store the camera in the extremely dusty or humid places.
・
Do not apply excessive force or static electricity that could damage the camera. Handle the camera with care.
・
Do not shoot direct images that are extremely bright (e.g., strong light source, sun, etc.). When extremely strong light
such as spotlight was shot, blooming or smear may occur. Please put the lens cap on when camera is not in use.
・
Follow the instructions in the
Section 6., “External Connector Pin Assignment”
for connecting the camera. Improper
connection may cause damages not only to the camera but also to the connected devices.
・
Confirm the mutual ground potential carefully before connecting the camera to monitors or computers. Any AC leaks or
coupling noises from the connected devices may cause damages or destroy the camera.
・
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply voltage may cause
damages or malfunction of the camera.
・
The voltage ripple of camera power DC +12V±10% shall be within ±50mV. Improper power supply voltage may cause
noises on the video signals.
・
The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please avoid noises like chattering
when rising.
[About Heat Dissipation]
For heat dissipation, CIS recommends M42 Mount lenses or F Mount Lenses with conversion ring to be used with VCC-16MV02.
Installing the camera to a heat radiating metal by fixing its front with 4 x M4 screws is also recommended.
10
40
20
30
50
10
11
12
電
源
電
圧
[V
]
電源 電圧 立 ち 上 がり 時間
[ ms]
9
8
7
60
70
Power Supply Voltage
Voltage Rising Time
