6�31�-
RS-485 COMMUNICATIONS: PROTOCOL
The RS-485 communications protocol is selected on this screen.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
The key
jumps between the possible options.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
Configuration values
Table 56:Configuration values: RS-485: Protocol�
RS-485: Protocol
Possible values
Modbus
BACnet
Note:
The device will restart after exiting the setup menu if the RS-485 communications parameters
have been modified.
Press key
to access the next programming step.
6�32�-
MODBUS PROTOCOL: BAUD RATE
Note:
Screen visible if the Modbus protocol has been programmed,
The baud rate of Modbus communications is programmed on this screen.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
The key
jumps between the possible options.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
67
Instruction Manual
CVM-C11
