Circutor CVM-C11, Instruction Manual

Page: 32 / 106

Figure 19: Analyzer profile screen displaying the maximum values�
To see the minimum values of the screen being displayed, press the key for 3 seconds. These are
displayed for 30 seconds. The symbol will be displayed.
The maximum and minimum values are reset on the programming menu. (
“6.17.- DELETING MAXIMUM
AND MINIMUM VALUES”
).
5�1�2�- MAXIMUM DEMAND
The device calculates the maximum demand of the following:

Current L1, L2 y L3.

The three-phase current.

Three-Phase Active Power.

Three-Phase Apparent Power.

Three-Phase Inductive Reactive Power

Three-Phase Capacitive Reactive Power
This value can be displayed on the display screen of the parameter by pressing the and
keys at the same time.
The symbol appears on the display (
Figure 20
).
Figure 20: Analyzer profile screen displaying the maximum demand values�
Press keys or to stop displaying the maximum demand values.
The maximum demand is programmed in the configuration menu from parameters “
6.10.- TYPE OF
INTEGRATION OF THE MAXIMUM DEMAND”
y
“6.11.- MAXIMUM DEMAND INTEGRATION PERIOD”.
The maximum demand values are reset on the programming menu:
“6.12. DELETING MAXIMUM DE-
MAND”.
32
CVM-C11
Instruction Manual