To access the first programming step, press the
key.
The programming parameters are validated as follows:
When on reaching the last point on the programming menu (“
”) the key is pressed
.
At any point in the programming, by pressing the key
for 3 seconds.
If the device is reset before validation or no key is pressed for 30 seconds, the configuration will not
be stored in the memory.
Note:
“ANNEX A.- CONFIGURATION MENUS”
you can see the configuration tree.
6�1�-
PRIMARY VOLTAGE
On this screen the voltage transformer primary is programmed.
Press key
for 3 seconds to edit the transformer primary value. The
icon appears at the top
of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Configuration values
Table 17:Configuration values: Primary voltage�
Primary voltage
Minimum value
1
Maximum value
599999
Voltage ratio x Primary Current
< 600000
Note:
The ratio is the relation between the primary and the secondary.
Press key
to access the next programming step.
38
CVM-C11
Instruction Manual
