55
Instruction Manual
COMPACT DC
In this section you can configure the following setup parameters for the STG:
IpStg:
IP address of the STG.
IpStg2:
IP address of the STG 2.
IpStg3:
IP address of the STG 3.
StgPath:
STG path.
StgPwd:
STG password.
StgTimeout:
Maximum STG wait time.
CheckSTG:
Checks the IP address of the STG.
RetryWS:
Number of retries for accessing the STG server.
TimeBetwWS:
Time between retries in attempting to access the STG server, in seconds.
StgProtocol:
STG communications protocol.
FtpProtocol:
FTP communications protocol.
5�14�5� NTP CONFIGURATION
Figure 64:NTP configuration�
In this section you can configure the following setup parameters for the NTP:
IpNtp:
Primary IP address for NTP synchronisation.
IpNtp2:
Secondary IP address for NTP synchronisation.
NtpMaxDeviation:
Time deviation to create an event, in seconds.
NtpSyncInterval:
Synchronisation time, in minutes.
NtpRecoveryInterval:
Synchronisation time for recovery, in minutes.
NtpMaxFailure:
Maximum time to consider the time to be valid, in minutes.
5�14�6� AUTHENTICATION CONFIGURATION
Figure 65:Authentication configuration�
In this section you can configure the following authentication setup parameters:
AuthenticationType:
Type of authentication.
