59
Instruction Manual
COMPACT DC
5�14�11� METER COMMUNICATIONS CONFIGURATION
Figure 70:Meter communications configuration�
, you can configure all of the parameters required to adjust the communica-
tions with the energy meters:
Priority:
You can select to enable or disable the
priorities assigned to the tasks in the case of a
collision..
TimeDev:
Minimum time deviation to force synchronisation of the energy meter, in seconds.
TimeDevOver:
Maximum time deviation to force synchronisation of the energy meter, in seconds.
NumMeters:
Indicates the maximum number of energy meters to be contained in any report gen-
erated by the concentrator.
0
indicates that the report will contain all the energy meters connected
to the concentrator.
TimeSendReq:
Maximum time to send a report, in seconds.
TimeDisconMeter:
Time at which the device passes from
TF
(Temporary fault)
status to
PF
(Perma-
nent fault) status, in seconds.
RetryDisconMeter:
Maximum number of retries to communicate with an energy meter.
TimeRetryInterval:
Time between retries at communications with an energy meter, in seconds.
MeterRegData:
Information to gather when an energy meter connects.
S26Content:
Information to obtain in the
S26
report.
ValuesCheckDelay:
Minimum time between an order and a reading, in seconds.
SyncMeter:
Information to gather when an energy meter connects.
TimeOutMeterFwU:
Maximum meter upgrade time.
TimeOutMeterFwUWithoutCom:
Maximum meter upgrade time, in seconds.
MaxOrderOutdate:
Window of time for the validation of orders, in seconds.
